How To Fix An Electric Recliner That Won’t Close

It can be frustrating when you find that your recliner stopped working or won’t close. A recliner that won’t close is a huge inconvenience. It makes it impossible to do anything else other than find an unoccupied recliner somewhere in the house. Sometimes, you even have to call a repairman to fix the broken recliner. However, if you know how to fix an electric recliner that won’t close, you will save much money and time.

What Causes a Power Recliner to Stop Working?

There are several things that can cause a power recliner to stop working. The most common reason is a problem with the motor or the wiring. Other potential causes include a blown fuse, a tripped circuit breaker, or a problem with the transformer. If your recliner has stopped working, check these potential causes before calling for service.

One of the most common reasons a power recliner stops working is because of a problem with the motor. The motor is responsible for moving the chair back and forth, and if it isn’t working properly, the chair won’t move at all. You may need to replace the motor if it has burned out or if the brushes are worn out.

Another potential cause of a power recliner stopping working is a problem with the wiring. Over time, the wires can become frayed or damaged, which can cause them to break. This can prevent electricity from flowing through them properly, and as a result, the chair won’t work. Inspect the wires for any damage and replace them if necessary.

A blown fuse can also cause a power recliner to stop working. When a fuse blows, it means that there is an overload of electricity flowing through it. This can happen if too many appliances are plugged into one circuit or if there is a short circuit somewhere in the wiring. Replacing the fuse should fix the problem and allow the chair to work again.

A tripped circuit breaker can also cause a power recliner to stop working. This happens when there is too much electricity flowing through the breaker, and it trips to protect itself from damage. Once it trips, you’ll need to reset it before the chair will work again.

Finally, a problem with the transformer can also cause a power recliner to stop working. The transformer converts electricity from one voltage to another, and if it isn’t working properly, the chair won’t get enough power to operate. You may need to replace the transformer if it has burned out or if it isn’t providing enough power to the chair.

How do I Reset my Electric Recliner?

If your electric recliner isn’t working properly, you may need to reset it. To do this, you make sure that the recliner is turned off. Then, disconnect the power cord from the outlet. Next, find the reset button on the recliner. It is usually located underneath the armrest.

Once you have found the reset button, press and hold it for about 5 seconds. After 5 seconds have passed, release the button and then reconnect the power cord to the outlet. Finally, turn on the recliner and test it out. If it still isn’t working properly, you may need to call a professional for assistance.

Can you Manually Close an Electric Recliner?

If your electric recliner won’t close, it may be due to a few different reasons. The most common reason is that the motor has become disengaged from the track. This can happen if you try to force the chair to close without first pressing the button to release the motor. If this is the case, you’ll need to press the button to release the motor, then try closing the chair again. If the chair still won’t close, there may be an issue with the wiring or another mechanical component.

In some cases, you may be able to manually close an electric recliner. This is usually only possible if there is something blocking the chair from closing, such as a piece of furniture. If you can’t manually close the chair, you’ll need to call a technician to come and take a look at it.

 

Related posts

Leave a Reply

Your email address will not be published.