best hydraulic pump for salon chair

Best Hydraulic Pump for Salon Chair and Repair

A chair is one of your must-have furnitures for either tech artists or clients at a salon, e.g nail beauty. You need to sit as comfortably as possible while undergoing treatments or simply getting a haircut. The salon chairs with a hydraulic pump are some of the best out there because they can be lifted and rotated in such a way that you can reach the desired level of comfort.

However, the drawback is the hydraulic pumps are not indestructible, so some of them end up running their course after being used for a longer time. Luckily, you can fix the problem with the proper replacements. In this post, we will go over how to fix a hydraulic chair from going down, but also over a review of the best hydraulic pump for salon chairs.

ZHFEISY Barber Beauty Salon Chair Replacement Hydraulic Pump Reviewed

This hydraulic pump may be just what you need for your salon chair. When one of your chairs has issues with the old pump causing the chair to go down, things can get a bit troublesome. In this case, you won’t be able to help your clients sit comfortably in the chair or get them in a convenient position to work on their hair or offer them different beauty care routines. So, you might end up losing clients, and it can also lead to you being unable to work properly. Luckily, replacing the old hydraulic pump with the ZHFEISY one will change things considerably.

The product is made from a strong material, more specifically chrome steel. It is sturdy, durable and bound to hold off for longer periods. The frame is also made from alloy steel, which also provides durability. This will give you peace of mind that you won’t need another replacement too soon.

It is also heavy-duty, as it has a 440 lbs weight capacity. Therefore, this strength can help keep the chair stable, preventing discomfort or, even worse, the risk of your clients falling. The product was built to last.

The ZHFEISY salon chair replacement hydraulic pump will also act as a replacement for most chairs. It has an adjustable height of 4.3 inches, which is more than enough when serving your clients in the salon. Some hydraulic pumps are difficult to adjust and hardly reach the desired weight, which can make things less convenient, but that won’t be an issue with this product.

The pump is easy to use and clean too. So, maintenance won’t be an issue. In terms of usage, you can get it to the right height in an instant, and also move it back to its original position easily when you’re done.

Pros

  • It is made from a durable material;
  • It is easy to use;
  • It has a large capacity and great stability;
  • It can be cleaned and maintained with ease;
  • It can be a great replacement for an old, malfunctioning pump

Cons

  • It might be a bit expensive;
  • While it fits most chairs, it will still not fit all models

How to Fix a Hydraulic Chair from Going Down?

After a long time of using your hydraulic salon chair, you may notice that it is going down, and no matter what you do, it won’t stay up anymore. Unfortunately, many chairs of this type end up having this fate. But if you cannot exactly replace your chair at the moment or don’t want to, you can fix your hydraulic chair for the time being.

how to repair office chair sinking

The best way to do this is to fill it with hydraulic fluid. The majority of the barber chairs come with a hydraulic system that requires hydraulic fluid in order to work. With this mechanism, the hairstylist is then able to work with the chair and move it up and down until reaching the ideal height.

Inside the gas cylinder, there is a spring. When you press the right button, a valve opens. If you are sitting on the chair at the same time, doing this will make the air exit the cylinder, so the chair goes lower. But if you are not sitting on it while doing this, the spring will expand the cylinder instead, which allows the chair to go upwards.

Over time, the system won’t work properly anymore, and this is because the hydraulic fluid level decreases. Therefore, it’s essential to know how to fill the chair with hydraulic fluid so the system doesn’t fail when you have a client sitting on the chair. Hydraulic jack oil is the fluid that most hydraulic barber chairs use. This is because it is low in viscosity and can be either synthetic or mineral based.

fill the chair with hydraulic fluid

To fill the chair with hydraulic fluid, you have to make sure you put it in the lowest position first. Press the foot button downwards and then put some pressure so the chair moves down. Next, unscrew the fill nut. It is located at the chair’s bottom, but don’t hesitate to check the manual of the chair to locate it quicker. An Alexa wrench will be ideal for unscrewing the fill nut.

Then, you will have to fill the chair with hydraulic fluid. Put the liquid in a spray bottle and, with the help of a funnel, fill your chair. 2-3 quarts of the fluid will be necessary to make sure the chair starts working properly again.

Tighten the hydraulic fill nut with a simple wrench, but make sure you replace the old fill nut with a new one, or else you may deal with leaks. Lastly, test the salon chair to see if it works properly and if there is any excess air in the system.

The Bottom Line

It’s important to know how to fix your hydraulic salon chair so your clients can sit comfortably while you’re giving them a haircut or offering them a relaxing treatment, e.g eyelash. But if filling it with hydraulic fluid still doesn’t do the job, you may want to replace the hydraulic pump, in which case you should look into the product we presented.

Leave a Comment

Your email address will not be published. Required fields are marked *